- Back
- TCT Circular Saw Blades
- For Multi-rip Machines
For Multi-rip Machines
- Material: natural solid – longitudinal cuts of soft and hard wood
- Usage: multi-rip sawing of massive natural woods
- Machine: multi-rip saw, for single shaft, double shaft and splitting machine
We can produce the circular saw blades for you.
In case you did not find the type of circular saw blades you require in our catalogue, please contact us. We will make them upon your specification.
94 FZ +2
- Universal rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge and a lower height of the cut
- Usage: for multi-rip machines for primary processing of wood and pallet production
| D | S | s | d | z | hmax | dp max |
| 250 | 3,6 | 2,5 | 70,80 | 16+2 | 50 | 130 |
| 300 | 4,0 | 2,8 | 70,80 | 18+2 | 70 | 130 |
| 315 | 4,0 | 2,8 | 80 | 18+2 | 80 | 130 |
| 350 | 4,0 | 2,8 | 70,75,80 | 20+2 | 100 | 135 |
| 400 | 4,0 | 2,8 | 70,80 | 24+2 | 110 | 185 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
| opening | C1xA1 | C2xA2 |
|---|---|---|
| 70 | 13x80 | 20x83 |
| 75 | 13x80 | 20x83 |
| 80 | 14x90 | 20x83 |
The central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ +2+2
- Universal rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge
- Usage: for multi-rip machines for primary processing of wood and pallet production
| D | S | s | d | z | hmax | dp max |
| 250 | 3,2 | 2,2 | 70,80 | 16+2+2 | 65 | 105 |
| 300 | 3,2 | 2,2 | 70,80 | 18+2+2 | 85 | 120 |
| 300 | 3,2 | 2,2 | 30 | 24+2+2 | 85 | 120 |
| 315 | 3,2 | 2,2 | 70,80 | 18+2+2 | 90 | 120 |
| 350 | 3,6 | 2,5 | 70,75,80 | 20+2+2 | 110 | 120 |
| 400 | 4,0 | 2,8 | 30 | 18+2+2 | 120 | 145 |
| 400 | 4,0 | 2,8 | 70,80 | 24+2+2 | 120 | 145 |
| 450 | 4,4 | 3,2 | 70,80 | 20+2+2 | 140 | 160 |
| 450 | 4,4 | 3,2 | 30 | 28+2+2 | 140 | 160 |
| 500 | 4,4 | 3,2 | 30 | 22+2+2 | 155 | 180 |
| 500 | 4,4 | 3,2 | 70 | 28+2+2 | 155 | 180 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
| opening | C1xA1 | C2xA2 |
|---|---|---|
| 70 | 13x80 | 20x83 |
| 75 | 13x80 | 20x83 |
| 80 | 14x90 | 22x93 |
The central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ +2+2+2
- Universal rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge
- 6 wiper slots enable excellent saw stability even when cutting very long round wood or prisms
- Usage: for multi-rip machines for primary processing of wood and pallet production
D | S | s | d | z | hmax | dp max |
| 400 | 4,0 | 2,8 | 30 | 24+2+2+2 | 130 | 125 |
| 450 | 4,4 | 3,2 | 30 | 20+2+2+2 | 140 | 130 |
| 450 | 4,4 | 3,2 | 80 | 28+2+2+2 | 155 | 130 |
| 500 | 4,4 | 3,2 | 30 | 22+2+2+2 | 180 | 130 |
| 500 | 4,4 | 3,2 | 80 | 28+2+2+2 | 180 | 130 |
| 550 | 5,0 | 3,5 | 30 | 24+2+2+2 | 195 | 150 |
| 550 | 5,0 | 3,5 | 30 | 32+2+2+2 | 195 | 150 |
| 600 | 5,0 | 3,5 | 30 | 26+2+2+2 | 210 | 170 |
| 600 | 5,0 | 3,5 | 30 | 34+2+2+2 | 210 | 170 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
| opening | C1xA1 | C2xA2 |
|---|---|---|
| 80 | 14x90 | 22x93 |
The central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.2 LFZ
- longitudinal cuts of soft and hard woods
- trimming saw, multi-rip, joining saw
- saw blade geometry includes a chip thickness limiter
D | S | s | d | z | hmax | dp max |
| 250 | 3,2 | 2,2 | 30 | 18+3 | 60 | 115 |
| 300 | 3,2 | 2,2 | 30 | 18+3 | 75 | 130 |
| 350 | 3,6 | 2,5 | 30 | 20+2+2 | 100 | 105 |
| 400 | 4,0 | 2,8 | 30 | 24+2+2 | 120 | 120 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
- made to customer’s requestThe central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
- In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ – MASSIVE
- Extra- strong rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge. They are designed for extreme cutting conditions thanks to the very stable and massive saw body, which eliminates the arising side strain
- Usage: for multi-rip machines
| D | S | s | d | z | hmax | dp max |
| 315 | 4,0 | 2,8 | 70,80 | 18+2+2 | 90 | 120 |
| 350 | 4,0 | 2,8 | 70,75,80 | 20+2+2 | 110 | 120 |
| 400 | 4,2 | 3,0 | 30 | 20+2+2 | 120 | 145 |
| 450 | 5,0 | 3,5 | 30 | 20+2+2 | 140 | 160 |
| 500 | 5,0 | 3,5 | 30 | 22+2+2+2 | 180 | 130 |
| 550 | 5,5 | 3,5 | 30 | 24+2+2+2 | 195 | 150 |
| 600 | 6,2 | 4,0 | 30 | 26+2+2+2 | 210 | 170 |
| 700 | 6,5 | 4,5 | 30 | 28+2+2+2 | 240 | 210 |
| 800 | 7,5 | 5,0 | 30 | 24+2+2+2+2 | 310 | 170 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
| opening | C1xA1 | C2xA2 |
|---|---|---|
| 70 | 13x80 | 20x83 |
| 75 | 13x80 | 20x83 |
| 80 | 14x90 | 22x93 |
The central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ – MASSIVE plus
- Extra- strong rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge. They are designed for extreme cutting conditions thanks to the very stable and massive saw body, which eliminates the arising side strain
- Usage: for multi-rip machines
| D | S | s | d | z | hmax | dp max |
| 300 | 5,0 | 3,5 | 30 | 18+2+2 | 90 | 105 |
| 320 | 5,0 | 3,5 | 30 | 18+2+2 | 100 | 105 |
| 350 | 5,0 | 3,5 | 30 | 18+2+2 | 115 | 105 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 WZ – EFFECTIVE
- Thin rip saw blades for longitudinal cutting of all types of wood, especially planks and stronger boards. The decrease of the waste will efficiently show in energy savings and increased yield.
- WZ tooth geometry ensures a smooth, stable cut with a superior quality of the cutting edge, it is suitable for use with a higher quality wood
- Usage: for multi-rip machines
| D | S | s | d | z | hmax | dp max |
| 250 | 2,7 | 1,8 | 30 | 20+2+2 | 65 | 110 |
| 300 | 2,7 | 1,8 | 30 | 24+2+2 | 85 | 120 |
| 350 | 3,5 | 2,5 | 30 | 24+2+2+2 | 110 | 120 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ – TOS, RAIMANN, COSTA
- Specially constructed multi-rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge for multi-rip machines by TOS SVITAVY
- Possibility to rip wood up to the clamping flange of the saw blade without losing body stability of the saw blade with a large side strain. Thereby it ensures the maximum utilisation of the machine. With its design of the keyways, it also offers the possibility of a smoother meshing into the cut.
| D | S | s | d | z | hmax | dp max |
| 300 | 3,2 | 2,2 | 80 | 18+2+2 | 90 | 105 |
| 320 | 3,2 | 2,2 | 80 | 18+2+2 | 100 | 105 |
| 350 | 4,0 | 2,8 | 80 | 18+2+2 | 115 | 105 |
| 400 | 4,0 | 2,8 | 80 | 20+2+2 | 140 | 105 |
| 450 | 4,4 | 3,2 | 80 | 24+2+2 | 165 | 105 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
| opening | 4xC1xA1 |
|---|---|
| 80 | 13x90 |
The central bore of all saw blades can be enlarged up to: dmax = dpmax – 30 mm
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 WZ – TOS, RAIMANN, COSTA
- Specially designed rip saw blades for longitudinal cutting of all types of wood, dry and wet
- Possibility to rip wood up to the maximum bore of the saw blade without losing body stability of the saw blade with a large side strain. Thereby it ensures the maximum utilisation of the machine.
- With its design of the wiper slots, it also offers the possibility of a smoother meshing into the cut.
- The WZ geometry ensures a smooth, stable cut with a superior quality of the cutting edge and electric energy savings.
- It is suitable to use for a higher wood quality
| D | S | s | d | z | hmax | dp max |
| 300 | 3,2 | 2,2 | 30 | 18+2+2 | 90 | 105 |
| 320 | 3,2 | 2,2 | 30 | 18+2+2 | 100 | 105 |
| 350 | 3,6 | 2,5 | 30 | 18+2+2 | 115 | 105 |
| 400 | 3,6 | 2,5 | 30 | 20+2+2 | 140 | 105 |
| 450 | 4,0 | 2,8 | 30 | 24+2+2 | 165 | 105 |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm], dp max-maximum bore diameter [mm]
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 FZ – Angle Tilting Saws
- Specially designed rip saw blades for angle tilting saws
- The position and the shape of wiper slots allow for cutting maximum heights while preserving the stability of the saw blades even in long cuts.
- The blades are designed for vertical and horizontal cutting – they are specially hardened for high stability in the cut.
| D | S | s | d | z | hmax | |
| STROJCAD | ||||||
| 450 | 5,0 | 3,5 | 30+6/17/96 | 20+2+2 | 160 | |
| 450 | 5,0 | 3,5 | 55+6/17/112 | 20+2+2 | 145 | |
| 500 | 5,0 | 3,5 | 30+6/17/96 | 22+2+2+2 | 185 | |
| 500 | 5,0 | 3,5 | 55+6/17/112 | 22+2+2+2 | 170 | |
| 550 | 5,5 | 3,5 | 30+6/17/96 | 24+2+2+2 | 210 | |
| 550 | 5,5 | 3,5 | 55+6/17/112 | 24+2+2+2 | 190 | |
| 700 | 6,5 | 4,5 | 55+8/17/172 | 28+2+2+2 | 240 | |
| WEP | ||||||
| 500 | 5 | 3,5 | 30+8/11/100+2/10/60 | 22+2+2+2 | 170 | |
| 550 | 5,5 | 3,5 | 30+8/11/100+2/10/60 | 24+2+2+2 | 190 | |
| 500 | 5 | 3,5 | 30+8/11/150+2/10/60 | 22+2+2+2 | 150 | |
| 550 | 5,5 | 3,5 | 30+8/11/150+2/10/60 | 24+2+2+2 | 170 | |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth, hmax-maximum cut height [mm]
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.
94.1 WZ – Angle Tilting Saws
- the number of teeth is calculated for a maximum cutting height
- Clearance teeth exactly match the flange of individual machine types, which eliminates cracking of saw blades while ensuring maximum amount of chip removal from the cut
- the reinforcement and thermal treatment of the saw blades ensures their perfect action in the horizontal cut conditions
- the tooth geometry is optimised for maximum cutting speed of the saw blades
| D | S | s | d | z | |
| STROJCAD | |||||
| 500 | 5,0 | 3,5 | 30 | 22+2+2+2 | |
| 500 | 5,0 | 3,5 | 55 | 22+2+2+2 | |
| 550 | 5,5 | 3,5 | 30 | 24+2+2+2 | |
| 550 | 5,5 | 3,5 | 55 | 24+2+2+2 | |
Explanation: D-blade diameter (mm), S-tooth width [mm], s-body thickness [mm], d-bore [mm], z-number of teeth
In case that you did not find the type of saw blades which you require in our catalogue, please contact us. We will make them upon your specification.